74840-9182

ISL28117FRTBZ-T7 amplifier basic information:

ISL28117FRTBZ-T7 is an OPERATIONAL AMPLIFIER from Intersil. Commonly used packaging methods are HVSON, SOLCC8,.12,25

ISL28117FRTBZ-T7 amplifier core information:

The ISL28117FRTBZ-T7 has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.001 µA Its maximum average bias current is 0.0015 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the ISL28117FRTBZ-T7 has a nominal slew rate of 0.5 V/us. The maximum slew rate of the ISL28117FRTBZ-T7 given by the manufacturer is 0.68 mA. Its minimum voltage gain is 3000000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28117FRTBZ-T7 gain becomes 0.707 times the low-frequency gain is 1500 kHz. The ISL28117FRTBZ-T7 has NO power. Its programmable power is NO.

The nominal supply voltage of the ISL28117FRTBZ-T7 is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28117FRTBZ-T7 is 160 µV (input offset voltage: the compensation voltage required between the two input terminals to make the output terminal of the op amp 0V (or close to 0V).)

Related dimensions of ISL28117FRTBZ-T7:

The width of ISL28117FRTBZ-T7 is: 3 mm, and the length is 3 mm. ISL28117FRTBZ-T7 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8, 8, 8

ISL28117FRTBZ-T7 amplifier additional information:

ISL28117FRTBZ-T7 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It belongs to the low offset class of amplifiers. The frequency compensation status of ISL28117FRTBZ-T7 is: YES. Its temperature grade is: AUTOMOTIVE.

And its humidity sensitivity level is: 3. It is a micropower amplifier. The corresponding JESD-30 code is: S-PDSO-N8. The corresponding JESD-609 code is: e3. The package code of ISL28117FRTBZ-T7 is: HVSON.

The materials for the ISL28117FRTBZ-T7 package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28117FRTBZ-T7 package pin formats are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD. The maximum seat height is 0.8 mm.