MM6561XF

MM6561XF amplifier basic information:

MM6561XF is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are LSOP, SOP8,.25

MM6561XF amplifier core information:

The minimum operating temperature of MM6561XF is -20 °C and the maximum operating temperature is 75 °C. Maximum bias current at 25°C: 0.5 µA Maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of MM6561XF is 3 V/us. The maximum slew rate of MM6561XF given by the manufacturer is 2.7 mA. Its minimum voltage gain is 19950. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MM6561XF gain becomes 0.707 times the low-frequency gain is 7000 kHz. The power of MM6561XF is NO. Its programmable power is NO.

The nominal supply voltage of MM6561XF is 10 V, and its corresponding nominal negative supply voltage is -10 V. The input offset voltage of MM6561XF is 500 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of MM6561XF:

The width of MM6561XF is: 4.4 mm and the length is 5.2 mm. MM6561XF has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

MM6561XF amplifier additional information:

MM6561XF adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It belongs to the low offset class of amplifiers. The frequency compensation status of MM6561XF is: YES. Its temperature grade is: COMMERCIAL EXTENDED.

It is not a micropower amplifier. The corresponding JESD-30 code is: R-PDSO-G8. The packaging code of MM6561XF is: LSOP. The materials used in the MM6561XF package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The MM6561XF package pin forms are: SMALL OUTLINE, LOW PROFILE. Its terminal forms are: GULL WING. The maximum seat height is 1.7 mm.