M5203L

Basic information of M5203L amplifier:

M5203L is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are SIP, SIP8,.06

M5203L amplifier core information:

The minimum operating temperature of the M5203L is -20 °C and the maximum operating temperature is 75 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 1 µA Its maximum average bias current is 1 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of M5203L is 4 V/us. The maximum slew rate of M5203L given by the manufacturer is 6 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of M5203L becomes 0.707 times the low-frequency gain. The frequency is 14000 kHz.

The nominal supply voltage of M5203L is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the M5203L is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of M5203L:

The width of M5203L is: 2.8 mm and the length is 19 mm. M5203L has 8 terminals. Its terminal position type is: SINGLE. Terminal pitch is 2.54 mm. Total pins: 8

M5203L amplifier additional information:

M5203L adopts VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of M5203L is: YES. Its temperature grade is: COMMERCIAL EXTENDED. The M5203L is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-PSIP-T8. The corresponding JESD-609 code is: e0. The packaging code of M5203L is: SIP. M5203L packaging materials are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. The M5203L package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 8.3 mm.