TLE2161BIP

Basic information of TLE2161BIP amplifier:

TLE2161BIP is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, DIP-8

TLE2161BIP amplifier core information:

The minimum operating temperature of TLE2161BIP is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.005 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TLE2161BIP is 10 V/us. The maximum slew rate of the TLE2161BIP given by the manufacturer is 0.375 mA, while the minimum slew rate is 5 V/us. Its minimum voltage gain is 10000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLE2161BIP gain becomes 0.707 times the low-frequency gain is 5600 kHz.

The nominal supply voltage of TLE2161BIP is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TLE2161BIP is 1300 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLE2161BIP:

The width of TLE2161BIP is: 7.62 mm and the length is 9.81 mm. TLE2161BIP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

TLE2161BIP amplifier additional information:

TLE2161BIP adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLE2161BIP is: YES (AVCL>=5). Its temperature grade is: INDUSTRIAL.

It is a micropower amplifier. TLE2161BIP is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T8. The packaging code of TLE2161BIP is: DIP.

The materials used in TLE2161BIP packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TLE2161BIP package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.