OPA623AU

OPA623AU amplifier basic information:

OPA623AU is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, SOIC-8

OPA623AU amplifier core information:

The minimum operating temperature of OPA623AU is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 20 µA Its maximum average bias current is 5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA623AU has a nominal slew rate of 2100 V/us. The maximum slew rate of OPA623AU given by the manufacturer is 7 mA. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the OPA623AU gain becomes 0.707 times the low-frequency gain. The frequency is 290000 kHz. The power of OPA623AU is NO. Its programmable power is NO.

The nominal supply voltage of the OPA623AU is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the OPA623AU is 30000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of OPA623AU:

The width of OPA623AU is: 3.9 mm, and the length is 4.9 mm. OPA623AU has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

OPA623AU amplifier additional information:

OPA623AU adopts the CURRENT-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of OPA623AU is: YES. Its temperature grade is: INDUSTRIAL.

It is not a micropower amplifier. OPA623AU is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G8. The packaging code of OPA623AU is: SOP.

The OPA623AU package materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA623AU package pin forms are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.