OPA2607H/2K5

OPA2607H/2K5 amplifier basic information:

OPA2607H/2K5 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, SO-8

OPA2607H/2K5 amplifier core information:

The OPA2607H/2K5 has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is NOT SPECIFIED

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of OPA2607H/2K5 is 600 V/us. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA2607H/2K5 gain becomes 0.707 times the low frequency gain is 35000 kHz.

The nominal supply voltage of the OPA2607H/2K5 is 12 V, and its corresponding nominal negative supply voltage is -12 V. The input offset voltage of OPA2607H/2K5 is 8500 µV (input offset voltage: the compensation voltage required between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of OPA2607H/2K5:

The width of OPA2607H/2K5 is: 3.9 mm, and the length is 4.89 mm. OPA2607H/2K5 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

OPA2607H/2K5 amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: NOT SPECIFIED. It contains lead. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0.

The packaging code of OPA2607H/2K5 is: HSOP. OPA2607H/2K5 packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA2607H/2K5 package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG. Its terminal forms are: GULL WING.

The maximum seat height is 1.75 mm.