MC33201VP

MC33201VP amplifier basic information:

MC33201VP is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

MC33201VP amplifier core information:

The MC33201VP has a minimum operating temperature of -55 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.2 µA Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MC33201VP has a nominal slew rate of 1 V/us. The maximum slew rate of the MC33201VP given by the manufacturer is 1.125 mA, while the minimum slew rate is 0.5 V/us. Its minimum voltage gain is 25000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MC33201VP gain becomes 0.707 times the low-frequency gain is 2200 kHz. The power of MC33201VP is NO. Its programmable power is NO.

The nominal supply voltage of the MC33201VP is 5 V. The range of its power supply is: 5 V. The input offset voltage of MC33201VP is 13000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of MC33201VP:

The width of MC33201VP is: 7.62 mm and the length is 9.78 mm. MC33201VP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

MC33201VP amplifier additional information:

MC33201VP adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of MC33201VP is: YES. Its temperature grade is: MILITARY.

It is not a micropower amplifier. MC33201VP is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The packaging code of MC33201VP is: DIP.

MC33201VP packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MC33201VP package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 4.45 mm.