OPA2345UA

OPA2345UA amplifier basic information:

OPA2345UA is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SOP,

OPA2345UA amplifier core information:

The minimum operating temperature of the OPA2345UA is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 0.00001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA2345UA has a nominal slew rate of 2 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA2345UA gain becomes 0.707 times the low-frequency gain is 3000 kHz.

The nominal supply voltage of the OPA2345UA is 5.5 V. The upper limit of its supply voltage is 7.5. The input offset voltage of VOPA2345UA is 1.2 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of OPA2345UA:

The width of OPA2345UA is: 3.9 mm and the length is 4.9 mm. OPA2345UA has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

OPA2345UA amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: 2. OPA2345UA is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-PDSO-G8.

The corresponding JESD-609 code is: e4. The packaging code of OPA2345UA is: SOP. OPA2345UA packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA2345UA package pin forms are: SMALL OUTLINE.

Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.