OPA2344PA

OPA2344PA amplifier basic information:

OPA2344PA is an OPERATIONAL AMPLIFIER. The commonly used packaging method is DIP,

OPA2344PA amplifier core information:

The minimum operating temperature of the OPA2344PA is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.00001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA2344PA has a nominal slew rate of 0.8 V/us. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA2344PA gain becomes 0.707 times the low-frequency gain is 1000 kHz.

The nominal supply voltage of the OPA2344PA is 5.5 V. The upper limit of its supply voltage is 7.5. The input offset voltage of VOPA2344PA is 1200 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of OPA2344PA:

The width of OPA2344PA is: 7.62 mm and the length is 9.81 mm. OPA2344PA has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

OPA2344PA amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: NOT SPECIFIED. It does not contain lead. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e4.

The packaging code of OPA2344PA is: DIP. OPA2344PA packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The OPA2344PA package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 5.08 mm.