TS635IDT

Basic information of TS635IDT amplifier:

TS635IDT is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are MICRO, PLASTIC, SO-8

TS635IDT amplifier core information:

The minimum operating temperature of TS635IDT is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is 260. Its maximum bias current at 25°C is: 15 µA. Its maximum average bias current is 30 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of TS635IDT is 40 V/us. The maximum slew rate of the TS635IDT given by the manufacturer is 15 mA, while the minimum slew rate is 23 V/us. Its minimum voltage gain is 5000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TS635IDT gain becomes 0.707 times the low-frequency gain is 130000 kHz. The power of TS635IDT is YES. Its programmable power is NO.

The nominal supply voltage of TS635IDT is 6 V, and its corresponding nominal negative supply voltage is -6 V. The input offset voltage of the TS635IDT is 6000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TS635IDT:

The width of TS635IDT is: 3.9 mm and the length is 4.9 mm. TS635IDT has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

TS635IDT amplifier additional information:

TS635IDT adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of TS635IDT is: YES (AVCL>=2). Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. TS635IDT is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e4.

The packaging code of TS635IDT is: SOP. The materials used in TS635IDT packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TS635IDT package pin forms are: SMALL OUTLINE. Its terminal forms are: GULL WING.

The maximum seat height is 1.75 mm.