MAX4481AUT

MAX4481AUT amplifier basic information:

MAX4481AUT is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are SOT-23, 6 PIN

MAX4481AUT amplifier core information:

The MAX4481AUT has a minimum operating temperature of -40 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is 240°C and its maximum average bias current is 0.0001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX4481AUT has a nominal slew rate of 0.08 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the MAX4481AUT gain becomes 0.707 times the low-frequency gain is 140 kHz.

The nominal supply voltage of the MAX4481AUT is 5 V. The upper limit of its supply voltage is 6 V. The input offset voltage of MAX4481AUT is 9000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of MAX4481AUT:

The width of MAX4481AUT is: 1.625 mm and the length is 2.9 mm. MAX4481AUT has 6 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.95 mm. Total pins: 6

MAX4481AUT amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: 1. The MAX4481AUT is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G6.

The corresponding JESD-609 code is: e0. The packaging code of MAX4481AUT is: LSSOP. The materials used in the MAX4481AUT package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MAX4481AUT package pin forms are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.45 mm.