LTC6247ITS8#PBF

Basic information of LTC6247ITS8#PBF amplifier:

LTC6247ITS8#PBF is an OPERATIONAL AMPLIFIER from Linear Technology. Commonly used packaging methods are VSSOP, TSSOP8,.1

LTC6247ITS8#PBF amplifier core information:

The LTC6247ITS8#PBF has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its peak reflow temperature is 260. Its maximum bias current at 25°C is: 1 µA. Its maximum average bias current is 1.5 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of LTC6247ITS8#PBF is 55 V/us. The maximum slew rate of the LTC6247ITS8#PBF given by the manufacturer is 3.6 mA, while the minimum slew rate is 50 V/us. Its minimum voltage gain is 1300. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LTC6247ITS8#PBF gain becomes 0.707 times the low-frequency gain is 150000 kHz. The power of LTC6247ITS8#PBF is NO. Its programmable power is NO.

The nominal supply voltage of the LTC6247ITS8#PBF is 2.7 V. The power supply range is: 2.7/5 V. The input offset voltage of LTC6247ITS8#PBF is 3750 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LTC6247ITS8#PBF:

The width of LTC6247ITS8#PBF is: 1.625 mm and the length is 2.9 mm. LTC6247ITS8#PBF has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

LTC6247ITS8#PBF amplifier additional information:

LTC6247ITS8#PBF adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of LTC6247ITS8#PBF is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. LTC6247ITS8#PBF is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e3.

The packaging code of LTC6247ITS8#PBF is: VSSOP. LTC6247ITS8#PBF packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. LTC6247ITS8#PBF package pin forms are: SMALL OUTLINE, VERY THIN PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING.

The maximum seat height is 1 mm.