LT1260CN16

Basic information of LT1260CN16 amplifier:

LT1260CN16 is an OPERATIONAL AMPLIFIER.

LT1260CN16 amplifier core information:

Its maximum average bias current is 3 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1260CN16 has a nominal slew rate of 900 V/us. When the op amp is used in a closed loop, at a specified closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1260CN16 gain becomes 0.707 times the low-frequency gain is 130000 kHz.

The nominal supply voltage of the LT1260CN16 is 12 V, and its corresponding nominal negative supply voltage is -12 V. The input offset voltage of the LT1260CN16 is 10000 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of the LT1260CN16 is: 7.62 mm.

Related dimensions of LT1260CN16:

LT1260CN16 has 16 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 16

LT1260CN16 amplifier additional information:

The LT1260CN16 is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T16. The corresponding JESD-609 code is: e0. The packaging code of LT1260CN16 is: DIP. The materials used in the LT1260CN16 package are mostly PLASTIC/EPOXY.

The package shape is RECTANGULAR. The LT1260CN16 package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 3.937 mm.