TLV2252AIP

Basic information of TLV2252AIP amplifier:

TLV2252AIP is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are ROHS COMPLIANT, PLASTIC, DIP-8

TLV2252AIP amplifier core information:

The minimum operating temperature of the TLV2252AIP is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLV2252AIP has a nominal slew rate of 0.1 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLV2252AIP gain becomes 0.707 times the low-frequency gain is 187 kHz.

The nominal supply voltage of the TLV2252AIP is 3 V. The upper limit of its supply voltage is 16. The input offset voltage of VTLV2252AIP is 1000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLV2252AIP:

The width of TLV2252AIP is: 7.62 mm and the length is 9.59 mm. TLV2252AIP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

TLV2252AIP amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: NOT APPLICABLE. The TLV2252AIP is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T8.

The corresponding JESD-609 code is: e4. The packaging code of TLV2252AIP is: DIP. The materials used in the TLV2252AIP package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The TLV2252AIP package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.