KM4210IC8TR3

Basic information of KM4210IC8TR3 amplifier:

KM4210IC8TR3 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are SOP, SOP8,.25

KM4210IC8TR3 amplifier core information:

The minimum operating temperature of KM4210IC8TR3 is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 3.5 µA Its maximum average bias current is 3.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the KM4210IC8TR3 has a nominal slew rate of 40 V/us. The minimum slew rate of KM4210IC8TR3 given by the manufacturer is 40 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of KM4210IC8TR3 becomes 0.707 times the low-frequency gain. The frequency is 28000 kHz. KM4210IC8TR3 has NO power. Its programmable power is NO.

The nominal supply voltage of KM4210IC8TR3 is 2.7 V, and its corresponding nominal negative supply voltage is. The input offset voltage of KM4210IC8TR3 is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Relevant dimensions of KM4210IC8TR3:

The width of KM4210IC8TR3 is: 3.9 mm and the length is 4.9 mm. KM4210IC8TR3 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

KM4210IC8TR3 amplifier additional information:

KM4210IC8TR3 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of KM4210IC8TR3 is: YES. Its temperature grade is: INDUSTRIAL.

It is a micropower amplifier. KM4210IC8TR3 is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0. The packaging code of KM4210IC8TR3 is: SOP.

The materials used in the KM4210IC8TR3 package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The KM4210IC8TR3 package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.