LT1013AIP

Basic information of LT1013AIP amplifier:

LT1013AIP is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are PLASTIC, DIP-8

LT1013AIP amplifier core information:

The minimum operating temperature of the LT1013AIP is -40 °C and the maximum operating temperature is 105 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.025 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LT1013AIP has a nominal slew rate of 0.4 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LT1013AIP gain becomes 0.707 times the low-frequency gain is 1000 kHz.

The nominal supply voltage of the LT1013AIP is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the LT1013AIP is 300 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LT1013AIP:

The width of LT1013AIP is: 7.62 mm and the length is 9.81 mm. LT1013AIP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LT1013AIP amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: NOT SPECIFIED. The LT1013AIP is not Rohs certified. The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0.

The packaging code of LT1013AIP is: DIP. The materials of LT1013AIP packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LT1013AIP package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 5.08 mm.