MAX436CSD+T

Basic information of MAX436CSD+T amplifier:

MAX436CSD+T is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are SOP, SOP14,.25

MAX436CSD+T amplifier core information:

The minimum operating temperature of the MAX436CSD+T is 70 °C. Its peak reflow temperature is 260°C and its maximum average bias current is 5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the MAX436CSD+T has a nominal slew rate of 850 V/us. The maximum slew rate of the MAX436CSD+T given by the manufacturer is 41 mA. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of the MAX436CSD+T becomes a low-frequency gain. The frequency at 0.707 times is 275000 kHz.

The nominal supply voltage of the MAX436CSD+T is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the MAX436CSD+T is 3000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the op amp output terminal 0V (or close to 0V).)

Related dimensions of MAX436CSD+T:

The width of MAX436CSD+T is: 3.9 mm and the length is 8.65 mm. MAX436CSD+T has 14 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 14

MAX436CSD+T amplifier additional information:

Its temperature grade is: COMMERCIAL. And its humidity sensitivity level is: 1. The MAX436CSD+T is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G14. The corresponding JESD-609 code is: e3.

The packaging code of MAX436CSD+T is: SOP. The materials used in the MAX436CSD+T package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The MAX436CSD+T package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING.

The maximum seat height is 1.75 mm.