TL080CDR

Basic information of TL080CDR amplifier:

TL080CDR is an OPERATIONAL AMPLIFIER. The commonly used packaging method is SO-8

TL080CDR amplifier core information:

The minimum operating temperature of TL080CDR is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.0004 µA Its maximum average bias current is 0.01 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TL080CDR has a nominal slew rate of 13 V/us. The maximum slew rate of the TL080CDR given by the manufacturer is 2.8 mA, while the minimum slew rate is 8 V/us. Its minimum voltage gain is 15000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TL080CDR gain becomes 0.707 times the low-frequency gain is 3000 kHz.

The nominal supply voltage of TL080CDR is 15 V, and its corresponding nominal negative supply voltage is -15 V. The power supply range is: +-15 V. The input offset voltage of TL080CDR is 20000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TL080CDR:

The width of TL080CDR is: 3.9 mm, the length is 4.9 mm. TL080CDR has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm. Total pins: 8

TL080CDR amplifier additional information:

TL080CDR adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TL080CDR is: NO. Its temperature grade is: COMMERCIAL.

TL080CDR is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The packaging code of TL080CDR is: SOP. The materials used for TL080CDR packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The TL080CDR package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING. The maximum seat height is 1.75 mm.