LM2904P

Basic information of LM2904P amplifier:

LM2904P is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are ROHS COMPLIANT, PLASTIC, DIP-8

LM2904P amplifier core information:

The minimum operating temperature of the LM2904P is -40 °C and the maximum operating temperature is 125 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.5 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM2904P has a nominal slew rate of 0.3 V/us. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM2904P gain becomes 0.707 times the low-frequency gain is 700 kHz.

The nominal supply voltage of the LM2904P is 5 V. The upper limit of its supply voltage is 26. The input offset voltage of VLM2904P is 10000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LM2904P:

The width of LM2904P is: 7.62 mm and the length is 9.59 mm. LM2904P has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

LM2904P amplifier additional information:

Its temperature grade is: AUTOMOTIVE. And its humidity sensitivity level is: NOT APPLICABLE. The LM2904P is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDIP-T8.

The corresponding JESD-609 code is: e4. The packaging code of LM2904P is: DIP. The materials of LM2904P package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The LM2904P package pin format is: IN-LINE.

Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.