TLC075CPWPR

TLC075CPWPR放大器基础信息：

TLC075CPWPR是一款OPERATIONAL AMPLIFIER。常用的包装方式为PLASTIC, HTSSOP-20

TLC075CPWPR放大器核心信息：

TLC075CPWPR的最低工作温度是，最高工作温度是70 °C。其峰值回流温度为22025℃下的最大偏置电流为：0.00005 µA他的最大平均偏置电流为0.0001 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLC075CPWPR has a nominal slew rate of 16 V/us. The maximum slew rate of the TLC075CPWPR given by the manufacturer is 14 mA, while the minimum slew rate is 9.5 V/us. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLC075CPWPR gain becomes 0.707 times the low-frequency gain is 10000 kHz. The power of TLC075CPWPR is NO. Its programmable power is NO.

The nominal supply voltage of the TLC075CPWPR is 5 V. The power supply range is: +-2.25/+-8/4.5/16 V. The input offset voltage of the TLC075CPWPR is 3000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLC075CPWPR:

The width of TLC075CPWPR is: 4.4 mm and the length is 6.5 mm. TLC075CPWPR has 20 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 20

TLC075CPWPR amplifier additional information:

TLC075CPWPR adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of TLC075CPWPR is: YES. Its temperature grade is: COMMERCIAL.

And its humidity sensitivity level is: 1. It is not a micropower amplifier. TLC075CPWPR is not Rohs certified. It contains lead. The corresponding JESD-30 code is: R-PDSO-G20.

The corresponding JESD-609 code is: e4. The packaging code of TLC075CPWPR is: HTSSOP. The materials used in the TLC075CPWPR package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. TLC075CPWPR package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG, THIN PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.2 mm.