TLE2027CP

Basic information of TLE2027CP amplifier:

TLE2027CP is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, DIP-8

TLE2027CP amplifier core information:

The minimum operating temperature of TLE2027CP is and the maximum operating temperature is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum bias current at 25°C is: 0.09 µA Its maximum average bias current is 0.15 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the TLE2027CP has a nominal slew rate of 2.8 V/us. The maximum slew rate of the TLE2027CP given by the manufacturer is 5.6 mA, while the minimum slew rate is 1.2 V/us. Its minimum voltage gain is 500000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the TLE2027CP gain becomes 0.707 times the low-frequency gain is 13000 kHz.

The nominal supply voltage of TLE2027CP is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of TLE2027CP is 145 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of TLE2027CP:

The width of TLE2027CP is: 7.62 mm and the length is 9.59 mm. TLE2027CP has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

TLE2027CP amplifier additional information:

TLE2027CP adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low offset class of amplifiers. The frequency compensation status of TLE2027CP is: YES. Its temperature grade is: COMMERCIAL. TLE2027CP is not Rohs certified.

It contains lead. The corresponding JESD-30 code is: R-PDIP-T8. The packaging code of TLE2027CP is: DIP. The materials used for TLE2027CP packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The TLE2027CP package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.