PM1012BIGZ

Basic information of PM1012BIGZ amplifier:

PM1012BIGZ is an OPERATIONAL AMPLIFIER. The commonly used packaging method is DIP,

PM1012BIGZ amplifier core information:

The minimum operating temperature of PM1012BIGZ is 70 °C. Its peak reflow temperature is NOT SPECIFIED Its maximum average bias current is 0.0003 µA

The maximum slew rate of PM1012BIGZ given by the manufacturer is 0.8 mA. When the op amp is used in closed loop, under a certain closed-loop gain (usually 1 or 2, 10, etc.), the gain of PM1012BIGZ becomes 0.707 times of the low-frequency gain. The frequency is 500 kHz.

The nominal supply voltage of PM1012BIGZ is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of PM1012BIGZ is 200 µV (input offset voltage: the compensation voltage between the two input terminals required to make the output terminal of the operational amplifier 0V (or close to 0V).) The width of PM1012BIGZ is: 7.62 mm.

Relevant dimensions of PM1012BIGZ:

PM1012BIGZ has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

PM1012BIGZ amplifier additional information:

Its temperature grade is: COMMERCIAL. PM1012BIGZ is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: R-GDIP-T8. The packaging code of PM1012BIGZ is: DIP.

The materials used in the PM1012BIGZ package are mostly CERAMIC and GLASS-SEALED. The package shape is RECTANGULAR. The PM1012BIGZ package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.