KA5532

Basic information of KA5532 amplifier:

KA5532 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are 0.300 INCH, DIP-8

KA5532 amplifier core information:

The minimum operating temperature of KA5532 is 70 °C. Maximum bias current at 25°C: 0.8 µA Maximum average bias current is 0.8 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the KA5532 has a nominal slew rate of 9 V/us. The manufacturer specifies a maximum slew rate for the KA5532 of 16 mA and a minimum slew rate of 6 V/us. Its minimum voltage gain is 2000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the KA5532 gain becomes 0.707 times the low-frequency gain is 10000 kHz.

The nominal supply voltage of KA5532 is 5 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of KA5532 is 4000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of KA5532:

The width of KA5532 is: 7.62 mm and the length is 9.2 mm. KA5532 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm. Total pins: 8

KA5532 amplifier additional information:

KA5532 adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of KA5532 is: YES. Its temperature grade is: COMMERCIAL. The corresponding JESD-30 code is: R-PDIP-T8.

The packaging code of KA5532 is: DIP. The materials used in KA5532 packaging are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The form of KA5532 package pins is: IN-LINE. Its terminal form is: THROUGH-HOLE.

The maximum seat height is 5.08 mm.