LM741EN

Basic information of LM741EN amplifier:

LM741EN is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are DIP, DIP8,.3

LM741EN amplifier core information:

The minimum operating temperature of the LM741EN is and the maximum operating temperature is 70 °C. Maximum bias current at 25°C: 0.08 µA Maximum average bias current is 0.21 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the LM741EN has a nominal slew rate of 0.7 V/us. The maximum slew rate of the LM741EN given by the manufacturer is 2.8 mA, while the minimum slew rate is 0.3 V/us. Its minimum voltage gain is 32000. When the op amp is used in a closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the LM741EN gain becomes 0.707 times the low-frequency gain is 1500 kHz.

The nominal supply voltage of the LM741EN is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of the LM741EN is 4000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of LM741EN:

The width of LM741EN is: 7.62 mm and the length is 9.8171 mm. LM741EN has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 2.54 mm.

LM741EN amplifier additional information:

LM741EN adopts the VOLTAGE-FEEDBACK architecture. It does not belong to the low offset class of amplifiers. The frequency compensation status of LM741EN is: YES. Its temperature grade is: COMMERCIAL. The LM741EN is not Rohs certified.

The corresponding JESD-30 code is: R-PDIP-T8. The corresponding JESD-609 code is: e0. The package code of LM741EN is: DIP. The materials used in the LM741EN package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR.

The LM741EN package pin format is: IN-LINE. Its terminal form is: THROUGH-HOLE. The maximum seat height is 5.08 mm.