Part Number | Manufacturer | Description |
---|---|---|
OPA552FAKTWT | Texas Instruments | High-Voltage, High-Current Operational Amplifiers 7-DDPAK/TO-263 |
OPA552FAKTWTG3 | Texas Instruments | High-Voltage, High-Current Operational Amplifiers 7-DDPAK/TO-263 |
OPA552FA/500 | Texas Instruments | High-Voltage, High-Current Operational Amplifiers 7-DDPAK/TO-263 -40 to 125 |
OPA552FA/500G3 | Texas Instruments | High-Voltage, High-Current Operational Amplifiers 7-DDPAK/TO-263 -40 to 125 |
OPA552FA amplifier basic information:
OPA552FA is an OPERATIONAL AMPLIFIER from Texas Instruments. Commonly used packaging methods are PLASTIC, D2PAK-7
OPA552FA amplifier core information:
The minimum operating temperature of the OPA552FA is -40 °C and the maximum operating temperature is 125 °C. Maximum bias current at 25°C: 0.0001 µA Maximum average bias current is 0.0001 µA
How to simply check the efficiency of an amplifier? Looking at its slew rate, the OPA552FA has a nominal slew rate of 24 V/us. The maximum slew rate of the OPA552FA given by the manufacturer is 10 mA. Its minimum voltage gain is 100000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the OPA552FA gain becomes 0.707 times the low-frequency gain is 12000 kHz. The power of OPA552FA is YES. Its programmable power is NO.
The nominal supply voltage of the OPA552FA is 30 V, and its corresponding nominal negative supply voltage is -30 V. The input offset voltage of the OPA552FA is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)
Related dimensions of OPA552FA:
The width of OPA552FA is: 8.89 mm, and the length is 10.095 mm. OPA552FA has 7 terminals. Its terminal position type is: SINGLE. Terminal pitch is 1.27 mm. Total pins: 7
OPA552FA amplifier additional information:
OPA552FA adopts the VOLTAGE-FEEDBACK architecture. It belongs to the low-bias class of amplifiers. It does not belong to the low offset class of amplifiers. The frequency compensation status of OPA552FA is: YES (AVCL>=5). Its temperature grade is: AUTOMOTIVE.
It is not a micropower amplifier. It contains lead. The corresponding JESD-30 code is: R-PSSO-G7. The package code of OPA552FA is: TO-263. The materials used in the OPA552FA package are mostly PLASTIC/EPOXY.
The package shape is RECTANGULAR. The OPA552FA package pin forms are: SMALL OUTLINE, HEAT SINK/SLUG. Its terminal forms are: GULL WING. The maximum seat height is 4.955 mm.
OPA552FA Also View
You may also be interested in
Popular Searches
Technical Videos