EL8186IWZ-T7A

Basic information of EL8186IWZ-T7A amplifier:

EL8186IWZ-T7A is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are LSSOP, TSOP6,.11,37

EL8186IWZ-T7A amplifier core information:

The minimum operating temperature of EL8186IWZ-T7A is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is 260. Its maximum bias current at 25°C is: 0.003 µA. Its maximum average bias current is 0.003 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of EL8186IWZ-T7A is 0.13 V/us. The maximum slew rate of the EL8186IWZ-T7A given by the manufacturer is 0.075 mA, while the minimum slew rate is 0.09 V/us. Its minimum voltage gain is 200000. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the EL8186IWZ-T7A gain becomes 0.707 times the low-frequency gain is 400 kHz. The power of EL8186IWZ-T7A is NO. Its programmable power is NO.

The nominal supply voltage of the EL8186IWZ-T7A is 5 V. The range of its power supply is: 5 V. The input offset voltage of EL8186IWZ-T7A is 1000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of EL8186IWZ-T7A:

The width of EL8186IWZ-T7A is: 1.6 mm and the length is 2.9 mm. EL8186IWZ-T7A has 6 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.95 mm. Total pins: 6

EL8186IWZ-T7A amplifier additional information:

EL8186IWZ-T7A adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It does not belong to the low offset class of amplifiers. The frequency compensation status of EL8186IWZ-T7A is: YES. Its temperature grade is: INDUSTRIAL.

And its humidity sensitivity level is: 2. It is a micropower amplifier. EL8186IWZ-T7A is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G6. The corresponding JESD-609 code is: e3.

The packaging code of EL8186IWZ-T7A is: LSSOP. The materials used in the EL8186IWZ-T7A package are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The EL8186IWZ-T7A package pin formats are: SMALL OUTLINE, LOW PROFILE, SHRINK PITCH. Its terminal forms are: GULL WING.

The maximum seat height is 1.45 mm.