ISL24211IRTZ-T13

ISL24211IRTZ-T13 amplifier basic information:

ISL24211IRTZ-T13 is a BUFFER from Intersil. The commonly used packaging method is HVSON,

ISL24211IRTZ-T13 amplifier core information:

The ISL24211IRTZ-T13 has a minimum operating temperature of -40 °C and a maximum operating temperature of 85 °C. Its maximum average bias current is 1 µA

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of the ISL24211IRTZ-T13 is 116 V/us. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL24211IRTZ-T13 gain becomes 0.707 times the low frequency gain is 60 MHz.

The nominal supply voltage of the ISL24211IRTZ-T13 is 18 V. The upper limit of its supply voltage is 20. The input offset voltage of VISL24211IRTZ-T13 is 15000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of ISL24211IRTZ-T13:

The width of ISL24211IRTZ-T13 is: 3 mm, and the length is 3 mm. ISL24211IRTZ-T13 has 10 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.5 mm. Total pins: 10

ISL24211IRTZ-T13 amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: 1. The corresponding JESD-30 code is: S-PDSO-N10. The corresponding JESD-609 code is: e3. The packaging code of ISL24211IRTZ-T13 is: HVSON.

The materials used in the ISL24211IRTZ-T13 package are mostly PLASTIC/EPOXY. The package shape is SQUARE. ISL24211IRTZ-T13 package pin formats are: SMALL OUTLINE, HEAT SINK/SLUG, VERY THIN PROFILE. Its terminal forms are: NO LEAD. The maximum seat height is 0.85 mm.