INA146UA/2K5

Basic information of INA146UA/2K5 amplifier:

INA146UA/2K5 is an INSTRUMENTATION AMPLIFIER. Commonly used packaging methods are ROHS COMPLIANT, SOP-8

INA146UA/2K5 amplifier core information:

The minimum operating temperature of INA146UA/2K5 is -40 °C and the maximum operating temperature is 85 °C. Its peak reflow temperature is 260°C, its maximum average bias current is 0.05 µA, and its maximum input offset current (IIO) is only 0.005 µA.

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of INA146UA/2K5 is 0.45 V/us. The maximum slew rate of INA146UA/2K5 given by the manufacturer is 0.75 mA. Its maximum voltage gain is 100 and its minimum voltage gain is 0.1. When the op amp is used in closed loop, at a certain closed-loop gain (usually 1 or 2, 10, etc.), the frequency when the INA146UA/2K5 gain becomes 0.707 times the low-frequency gain is 0.05 MHz.

The nominal supply voltage of INA146UA/2K5 is 15 V, and its corresponding nominal negative supply voltage is -15 V. The input offset voltage of INA146UA/2K5 is 5000 µV (input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of INA146UA/2K5:

The width of INA146UA/2K5 is: 3.9 mm and the length is 4.9 mm. INA146UA/2K5 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 1.27 mm.

INA146UA/2K5 amplifier additional information:

Its temperature grade is: INDUSTRIAL. And its humidity sensitivity level is: 3. INA146UA/2K5 is not Rohs certified. The corresponding JESD-30 code is: R-PDSO-G8. The corresponding JESD-609 code is: e0.

The packaging code of INA146UA/2K5 is: SOP. INA146UA/2K5 packaging materials are mostly PLASTIC/EPOXY. The package shape is RECTANGULAR. The INA146UA/2K5 package pin formats are: SMALL OUTLINE. Its terminal forms are: GULL WING.

The maximum seat height is 1.75 mm.