ISL28118MUZ-T13

Basic information of ISL28118MUZ-T13 amplifier:

ISL28118MUZ-T13 is an OPERATIONAL AMPLIFIER. Commonly used packaging methods are TSSOP, TSSOP8,.19

ISL28118MUZ-T13 amplifier core information:

The ISL28118MUZ-T13 has a minimum operating temperature of -55 °C and a maximum operating temperature of 125 °C. Its peak reflow temperature is 260

How to simply check the efficiency of an amplifier? Looking at its slew rate, the nominal slew rate of the ISL28118MUZ-T13 is 1 V/us. The maximum slew rate of the ISL28118MUZ-T13 given by the manufacturer is 1.6 mA. Its minimum voltage gain is 316000. When the op amp is used in a closed loop, at a specified closed loop gain (usually 1 or 2, 10, etc.), the frequency when the ISL28118MUZ-T13 gain becomes 0.707 times the low-frequency gain is 3200 kHz. The power of the ISL28118MUZ-T13 is NO. Its programmable power is NO.

The nominal supply voltage of the ISL28118MUZ-T13 is 5 V, and its corresponding nominal negative supply voltage is -5 V. The input offset voltage of the ISL28118MUZ-T13 is 270 µV (Input offset voltage: the compensation voltage added between the two input terminals to make the output terminal of the operational amplifier 0V (or close to 0V).)

Related dimensions of ISL28118MUZ-T13:

The width of ISL28118MUZ-T13 is: 3 mm, and the length is 3 mm. ISL28118MUZ-T13 has 8 terminals. Its terminal position type is: DUAL. Terminal pitch is 0.65 mm. Total pins: 8

ISL28118MUZ-T13 amplifier additional information:

ISL28118MUZ-T13 adopts the VOLTAGE-FEEDBACK architecture. It is not a low-bias amplifier. It belongs to the low offset class of amplifiers. The frequency compensation status of ISL28118MUZ-T13 is: YES. Its temperature grade is: MILITARY.

And its humidity sensitivity level is: 2. It is not a micropower amplifier. The ISL28118MUZ-T13 is not Rohs certified. It does not contain lead. The corresponding JESD-30 code is: S-PDSO-G8.

The corresponding JESD-609 code is: e3. The packaging code of ISL28118MUZ-T13 is: TSSOP. The materials used in the ISL28118MUZ-T13 package are mostly PLASTIC/EPOXY. The package shape is SQUARE. The ISL28118MUZ-T13 package pin forms are: SMALL OUTLINE, THIN PROFILE, SHRINK PITCH.

Its terminal forms are: GULL WING. The maximum seat height is 1.1 mm.