Home >
Optoelectronic Circuits >Optoelectronic Display Circuits > DC power supply voltage over-limit indication circuit 2
DC power supply voltage over-limit indication circuit 2
Source: InternetPublisher:太白金星 Keywords: DC power supply power supply voltage light emitting diode Updated: 2020/08/22
When the power supply voltage is lower than 10.2V, the yellow light-emitting diode VLi lights up, indicating that the battery
cannot continue to discharge. When the voltage exceeds 16.2V, the yellow, green and red LEDs VLi~VLa all light up, indicating that
charging must be stopped immediately or the charging current must be reduced. When the voltage is within 10.2-16.2V, the yellow and green light-emitting diodes
VLi and VL2 light up.
Latest Optoelectronic Circuits Circuits
- USB powered portable light
- Design and production of a practical electronic counting device
- Resistor value selection circuit
- 4-digit incandescent lamp display circuit
- Mains undervoltage and overvoltage protection circuit 2
- Chandelier brightness controller circuit using thyristor
- Remote anti-theft alarm
- Frost alarm circuit
- Fluorescent dimming circuit (1)
- Four color light circuit
Popular Circuits
- LED display drive circuit a
- IC directly drives LED display circuit
- Centralized control of the rescue alarm circuit
- PLC input interface light emitting diode display circuit b
- Several other phase sequence discriminator circuits a
- Multi-channel disconnection alarm circuit
- Smoke alarm circuit (3)
- Novel bicycle charger principle and circuit
- Integrated LED control board circuit 03
- LED driver circuit
京公网安备 11010802033920号