Home >
Optoelectronic Circuits >Optoelectronic Display Circuits > Fluorescent lamp DC starting circuit
Fluorescent lamp DC starting circuit
Source: InternetPublisher:国民男神经 Keywords: Fluorescent lamp starting circuit direct current Updated: 2020/02/18
Adding a rectifier diode VD can change the alternating current into pulsating direct current . The ballast coil has a low resistance
state to the direct current, which is conducive to starting the fluorescent lamp . If a capacitor is connected in parallel to both ends of the starter, the voltage of the starter can be increased.
Latest Optoelectronic Circuits Circuits
- Laser detection and indicating device system circuit design
- Practical sensitive light-controlled switch circuit diagram
- Lighting lamp voltage stabilizing circuit (2)
- Corridor automatic light-off device
- Economical and practical delay light circuit
- SH-803R holiday lights ASIC
- Bedside lamp controller circuit
- Touch lighting switch circuit three
- Four color light circuit
- Simple sensor alarm
Popular Circuits
- Inverter voltage starting circuit
- One of the AC contactor low voltage starting circuits
- Resistor-capacitor composite buck start circuit
- Button and contactor double interlock control forward and reverse start circuit
- Fluorescent lamp is connected to diode starting circuit under low temperature and low voltage conditions
- One control ten motor starting circuit_1
- electric starting circuit
- Shuanghua ZNB-P with contactor full voltage starting circuit
- Monostable start circuit
- High current switching power supply starting circuit
京公网安备 11010802033920号