Two motors start the circuit one after the other
Source: InternetPublisher:super_star Updated: 2011/04/26
Operating procedure: First press the start button ST1 of the motor M1, the KM1 coil is energized, the main contact is closed, the motor M1 starts and self-locks, and its other pair of normally open contacts are closed, connecting the line between KM2 and FT2 . At this time, the start button ST2 of the electric motor M2 is pressed. Only AC contactor KM2 can obtain power and motor M2 can start. Latest Control Circuits Circuits
- Analysis of the working principle of the sound and light controlled delay switch circuit
- How to Make a Hot Tub Smart and Remotely Operated with a Raspberry Pi
- Working principle of one Xipu STR soft starter controlling two motors
- JDB-LQ-TQ/2 motor full voltage starting circuit
- Design and production of radio remote control fan stepless speed regulator
- Design and production of wireless multi-location control switch circuit
- Do-it-yourself trial production of phase failure protection device
- Electric vehicle battery charging protection circuit
- Amplitude and phase detection leakage protection device designed and manufactured using PIC16C711A
- Homemade anti-theft watchdog
Popular Circuits
- Agricultural spraying and insecticide control circuit
- Chicken farm photoelectric control circuit
- Automatic tuning control circuit
- Haier KFR-25GW air conditioner control circuit schematic diagram
- Galanz rice cooker control circuit
- Sprinkler control circuit using AC motor
- Forward and reverse control circuit of micro DC motor b
- Temperature detection control circuit for vegetable greenhouses
- Button type electronic volume control circuit
- Wide input range non-synchronous voltage mode control circuit
京公网安备 11010802033920号