Alarm delay control circuit
Source: InternetPublisher:aerobotics Keywords: Alarm control circuit delay circuit Updated: 2021/01/07
Working principle of the circuit: When the courtyard door is opened, S2 is in the open state and S3 is in the closed
state. When S1 is connected, the entire circuit does not work because S2 is disconnected. After the owner goes out,
he closes the courtyard door. At this time, S2 is closed, S3 is disconnected, and the power supply charges C1 through R1.
C. The voltage at both ends gradually increases. After 2s, VT1 begins to conduct, VT2 is saturated, and the collector
outputs high level. Because S3 is disconnected, the rear-stage delay circuit loses power, VT3 and VT4 are cut off, and the
alarm does not work and is in an alert state. .
- DIY a practical audio-visual doorbell
- Production of two-color music lantern
- LJ2 series transistor proximity switch principle circuit diagram
- Telephone cipher circuit
- Computer host overheating alarm circuit
- Micro infrared receiver module PIC-12043S circuit diagram
- Catillac luggage compartment opening circuit diagram
- Ultrasonic humidifier circuit
- SCR control buzzer circuit
- Cadillac reversing light circuit diagram
- Long delay circuit using integrated circuit 2
- One of the thyristor turn-on delay circuits
- Thyristor cut-off delay circuit part 5
- Cut-off tube control charging delay circuit
- Temperature switch circuit four
- Lighting delay circuit using single-junction transistor Part 2b
- Intermittent cycle control start and stop circuit 4
- transistor long delay circuit
- 555 cascade long delay circuit
- Automatic conversion using transistor delay circuit
京公网安备 11010802033920号