Automatic switching circuit for motor Y-△ connection
Source: InternetPublisher:aerobotics Keywords: switching circuit motor automatic switching Updated: 2021/06/09
Working principle of the circuit: In the figure, VD, C, Crown, R2, RP, and ￡ form a signal sampling
circuit. The main circuit current of the motor is sensed to terminals n and 6 through the transformer ￡, and
the DC voltage is rectified by VD and filtered by C. Add to R. , both ends of R2 are divided and sent to the comparator
for comparison, and the output signal is sent to VT for amplification to drive JZ. The sampling signal is proportional to the current of
the main circuit of the motor . Adjusting RP, and RP2 can determine the main circuit .
The electrical signal obtained by the secondary side of ￡ must be above tens of millivolts, that is, it must be greater than
the minimum voltage required by the comparator.
- Simple phase failure protection circuit composed of intermediate relay
- Design and analysis of wire control circuit
- IGBT modules block overcurrent by controlling the gate
- Night dog barking anti-theft reminder circuit
- Simple disconnection burglar alarm
- Remote anti-theft alarm via telephone
- Guest room power automatic controller
- Synthesize the forward and reverse control circuit of the motor using three AC contactors
- Simple timer circuit diagram
- Household flower pot automatic watering device
- Differential amplifier emitter negative feedback gain control circuit
- Multi-channel patrol detection control circuit a
- fire smoke control circuit
- Multi-pole leakage protector circuit b
- CPU input and output and memory control circuit
- Bedside touch light detection control circuit
- Automatic door detection control circuit
- Neon light control circuit
- DC power supply non-stop switching circuit using thyristor
- Fuse automatic switching circuit
京公网安备 11010802033920号