Neon light control circuit
Source: InternetPublisher:fish001 Keywords: control circuit neon light transformer Updated: 2020/04/05
Neon lamps require a high starting voltage and require a magnetic leakage transformer for starting and rectification. The no-load secondary voltage of the magnetic leakage transformer is not less than 15kV, the capacity is 450V·A, the current is 24mA, and the short-circuit current is 30mA. Such a magnetic leakage transformer can light a lamp with a tube diameter of 12mm and an unfolded length of about 12m.
Neon light control circuit
- Brief Analysis of the Working Principle of AC Voltage Stabilizer Circuit
- Isolated two-wire current loop circuit (XTR101, ISO100)
- Constant current LED lamp driver circuit with soft start and anti-shock
- A small and easy-to-make fast charger
- Homemade low-power UPS
- UC3842 Electric Vehicle Charger
- Production of backup power supply for cordless phone
- Detailed explanation of mobile phone charger circuit diagram
- Fully automatic charger for NiCd batteries with discharge function
- Lead-acid battery overcharge and over-discharge protection circuit
- Analysis of characteristics of ten major types of inductors
- Transformer AC contactor DC operation circuit c
- Lightning protection wiring of transformer connected by Y and yn
- Simple buzzer circuit three
- Servo drive circuit with output of 150V and 50A
- Wire-controlled music lantern circuit (1)
- Transformer tap regulator
- LED drive circuit using low-frequency transformer and resistor current-limiting half-wave or full-wave rectification
- Transformer short circuit protector circuit
- Using transformer to control triac switching circuit