Internal circuit principle of M65839
Source: InternetPublisher:Lemontree Keywords: Circuit principle noise amplifier output voltage Updated: 2021/11/07
M65839SP is a dual-row 36-pin package. The internal circuit principle is shown in Figure 5-34, and the pin functions are shown in Table 5-20. The main
technical parameters are: operating voltage 5V, clock frequency 1MHz, operating current approximately 100mA; microphone amplifier gain
60dB, distortion 0.02%, output noise - 75dB; delay circuit delay time 131V, distortion
1.7 %, the output voltage is 5dBV, the output noise is -85dB; the line amplifier gain is OdB, the distortion is 0.02%,
the output noise is -92dB, the output voltage is 8dBV, and the input impedance is 32kno
- Make a high-quality DAC board
- 75W audio power amplifier made with TMOS150
- Single-ended Class A amplifier using gallstone composite tube design
- Biliary duct 2A3C Class A amplifier
- 6AS7 tube amplifier
- Typical applications of optocouplers in audio amplifier circuits
- Dual power supply audio power amplifier circuit composed of LM3875
- LMl876 is used to assist the audio power amplifier circuit
- Protection circuit and maintenance of household audio power amplifier
- Tube single-ended class A 300B power amplifier circuit
- Essentials of making a tube amplifier
- High performance broadband GaN power amplifier
- High-end four-channel mixer
- Cascade MMIC amplifier circuit diagram
- Differential bridge amplifier circuit diagram
- W7800 series application circuit
- It is forbidden to reconnect the circuit when a call comes after a power outagea
- noise limiter
- noise limiter
- Audio powered noise limiter