Is the interrupt configuration of PIC32MZ complicated?

asdmaill

Is the interrupt configuration of PIC32MZ complicated? [Copy link]

The board has no problems now, and the basic test code runs, but the interrupt does not work. I enabled the interrupt of timer 1, configured the timer, and enabled the relevant bits of interrupt enable IEC0, but the interrupt does not work. I read the reference manual carefully these two days, and it seems that in order to enable the interrupt, I have to configure the interrupt vector offset address myself, which seems to involve a lot of configurations, including the configuration of coprocessor 0 and the configuration of the CPU core. Is the interrupt configuration of this PIC32 so complicated?

wudianjun2001

Just use MHC to configure it, saving you the trouble of doing it yourself

asdmaill

Is MHC a code configurator?

wudianjun2001

asdmaill posted on 2018-2-8 15:56 Is MHC a code configurator?

MHC (MPLAB Harmony Configurator) can configure the underlying code. It is very convenient to use. Many underlying things can be directly generated.

asdmaill

Harmony keeps prompting initialization failure when starting in XIDE

asdmaill

XIDE is version V4.1, harmony is version v2_05_01

asdmaill

The operating system is XP, does this have any impact?

frenkie_wang

Harmony Chinese tutorial: http://www.microchip.com.cn/newc ... ledge&a=index&id=65 There are a lot of useful information in it, all in Chinese