What is the difference between Xilinx high-speed downloader jtag-hs3 and other SMT2, HS2?

lichenllin

What is the difference between Xilinx high-speed downloader jtag-hs3 and other SMT2, HS2? [Copy link]

For common problems:

• Does XJTAG-HS3 support ise?

It can support ise14.0 and above. Because ISE needs to install a virtual machine windows7 in windows10 to support the device. In windows 10 development, vivado software is now used. Vivado software can only support chips above 7 series, so 3 series and 6 series are not supported.

• Does XJTAG-HS3 need to install drivers?

The driver is included in Vivado and ISE. If it is not installed, please install install_digilent.exe in "installation version\data\xicom\cable_drivers t64\digilent" and install it in administrator mode.

• Can XJTAG-HS3 run on Linux?

Can run. Vivado can be directly installed on Linux, and the driver can also support it.

• What is the difference between XJTAG-HS3 and other SMT2 and HS2?

The speed of JTAG-HS3 is also 30Mb/s, and the speed of other SMT2 and HS2 is the same. The advantage of JTAG-HS3 is that it can support different voltage resets of ZYNQ. Our XJTAG-HS3 can better protect the chip and support hot swap function.

• What are the specifications of the XJTAG-HS3 adapter?

The connection to the burning box is 2*7 2.54MM male connector, the front is 2*7P 2.0MM female connector, 2*5P 2.54 female connector, 1*8P single row 2.54 single end female connector. The front is all connection cables.

lkh747566933

I have never learned advanced things like FPGA, and I only know how to use STM32 and ARM simulators.