Modelsim simulation problem

chenbingjy

Modelsim simulation problem [Copy link]

First picture:

I searched online and found that I need to modify the environment variables.

But there is no LICENSE_DELLXPX.TXT file in that folder.

The RC_nativelink_simulation.rpt file contains

Info: Starting NativeLink simulation with ModelSim software
Sourced NativeLink script c:/altera/13.1/quartus/common/tcl/internal/nativelink/modelsim.tcl
Error: You selected ModelSim as Simulation Software in EDA Tool Settings, however NativeLink found ModelSim-Altera in the path -- correct path or change EDA Tool Settings and try again
Error: NativeLink simulation flow was NOT successful

I didn't install the software modelsim-altera

I didn't set the modelsim-altera path either.

What's going on? Thank you!

chenbingjy

Now this problem has disappeared, but a new problem has arisen.

# ** Error: (vsim-3170) Could not find 'D:/ChromeCoreDownloads/CCB/CPLD/study/CRC_7/simulation/modelsim/rtl_work.CRC_7_vlg_tst()'.

In the past, the simulation project name was CRC_7, and you could just write CRC_7_vlg_tst() in the simulation file. Why is there an additional rtl_work?

Could any experts give me some advice? Thanks!