[Sipeed BL808 all-round board] Linux compilation test

流行科技

[Sipeed BL808 all-round board] Linux compilation test [Copy link]

 

At present, its drivers are not very complete, so many drivers cannot be used for the time being. If the drivers are complete later, more things can be played. At present, I can only test it first. I tested the compilation, but the one I compiled myself did not start.

Download the compilation tool first.

Then use the command ./buid.sh all to start the compilation. The above is the compilation process.

All compiled files are in the out directory.

Then use BouffaloLabDevCube software to burn and test. At this point, I burned my own compilation but it didn't start, which is very strange.

Just change the firmware they provide.

After trying it over and over again, I basically confirmed that there was something wrong with my compilation.

Later I discovered there was another script inside.

As the name implies, switch to m1sdock board. After compiling, there will be no problem.

At present, this should be a simple, basic Linux system. There should be no drivers for the camera and screen. I tried to mount the SD card, but it seems that it cannot be mounted.

Jacktang

Switch to m1sdock board, there will be no problem after compiling, this method can be used as a reference

freebsder

Thanks for sharing!