Is it better to use logic level MOS or standard level MOS for DCDC circuit driving?

小太阳yy

Is it better to use logic level MOS or standard level MOS for DCDC circuit driving? [Copy link]

 

Is it better to use a logic level MOS or a standard level MOS for driving the DCDC circuit? Is there any difference when using it?

maychang

[Is it better to use logic level MOS or standard level MOS for DCDC circuit driving? 】

Are there any MOS tubes designed specifically for a certain level on the market? It seems not.

chunyang

What is a "logic level" or "standard level" MOS tube? I have never heard of it!

okhxyyo

The question asked by the OP is a bit weird.

The level requirement for DCDC circuit driving should be determined by looking at the datasheet of the chip or circuit components you are using to see what the required level is.

The commonly used logic level standards for high and low levels are TTL, CMOS, LVTTL, LVCMOS, ECL, PECL, LVPECL, RS232, RS485 , etc. There are also some higher speed LVDS, GTL, PGTL, CML, HSTL, SSTL, etc.

MOS is MOS. Find the one that meets the requirements according to your circuit. It depends on your specific circuit.