【Child care machine】+ ESP32S3-BOX network connection process record

lingxin_yuhe

【Child care machine】+ ESP32S3-BOX network connection process record [Copy link]

 

Preface: This section describes the process of connecting esp32s3-box to the network.

1. Install the ESP BOX APP on your phone, as shown in the figure, and download it to your phone or pad.

2. After downloading, you need to register. When registering, fill in your email address and password (numbers, uppercase and lowercase letters are fine) and the verification code sent via email. The registration is successful as shown in the picture.

3. Click back to return to the main interface. I have to say that this APP is simple and generous. Add a device as shown in the picture.

4. Power on the ESP32S3-BOX device before clicking Add Device. If no device is found, search again. The figure shows the list of devices found.

5. Click on the device list to enter the network configuration stage, turn on the Bluetooth of your mobile phone as shown in the figure, connect the device to set up the network configuration function.

6. Wait for the network configuration to be successful, as shown in the figure.

7. After the network configuration is successful, the device name setting interface appears, as shown in the figure. At the same time, the correct network time, WiFi icon and cloud connection logo appear on the interface of the ESP32S3-BOX device.

Well, we have learned the network configuration process. If you want to re-configure the network, long press the boot button to re-configure the network. (The boot button is above the USB port. Because I didn’t take a complete screenshot of the first network configuration, I took a screenshot of the re-configuration, so the last screenshot did not change. As long as you understand the operation process, you can do it)

Jacktang

It's a good experience to share, thank you.