【PLC based on IoT】---Burn IIOT OS for PLC master control

cpsiot

【PLC based on IoT】---Burn IIOT OS for PLC master control [Copy link]

 

Step 1: Select the domestic industrial Internet of Things operating system, select the corresponding TF card, and click burn.

Step 2: After the burning is completed, insert the TF card into the Raspberry Pi and then power on.

Step 3: Get the Raspberry Pi IP address through LAN scanning.

Step 4: Log in to the Raspberry Pi via SSH to check whether the operating system starts normally.

The successful startup proves that the industrial Internet of Things operating system has been successfully burned.

Jacktang

The industrial IoT operating system was successfully burned and the PLC of the IoT was completed

cpsiot

It’s still early, the I/O expansion board is not finished yet, and there’s still the HMI configuration to do later…

mars4zhu

Where can I download this OS?

cpsiot

Need to apply by email

lugl4313820

I have used Raspberry Pi for several years, but this is the first time I have heard of Industrial Internet of Things. Thanks for sharing!

cpsiot

lugl4313820 posted on 2022-7-29 11:41 I have used Raspberry Pi for several years, and this is the first time I have heard of Industrial Internet of Things. Thanks for sharing!

You're welcome! This operating system combines PLC and IoT together, making it easier to use.

fxyc87

Could you please share the name and website of this system? I would also like to know more about it.