[Bluesun AB32VG1 RISC-V evaluation board] IDE installation and use

北方

[Bluesun AB32VG1 RISC-V evaluation board] IDE installation and use [Copy link]

 

1. This board is perfectly compatible with rtthread studio. Follow the manual first, click multiple pictures, and click next. First download the file.

2. Take multiple pictures by yourself.

RT-thread only supports Windows, and Windows doesn't like rt-thread.

It should be accompanied by the line: We don't trust this kind of software, it's very unreliable, extremely unreliable, so don't use it if you can, and don't blame me if you have any problems.

Then, I said, I just like things that are on the unreliable list, and I don’t use a firewall or 360, welcome to try it,

Next

started.

You must register, otherwise you cannot continue.

The homepage of the startup, then enter the IDE window to work,

SDK must be installed

First the latest version of source code

Install onboard support bsp

RISC-V toolchain must be installed,

That's half the preparation.

3. Download download, this program is not embedded in rt-thread stdudio

Downloading from gitee is also not allowed without registration

We use Downloader to download the firmware of the program. The compiled firmware has the suffix .dcf, and the file is located in the project Debug directory. The Downloader software needs to install its own USB to serial port driver. If the driver does not match, the following error will be reported. At this time, you need to install the matching USB to serial port driver.

After the download is complete, the configuration and preparation of basic conditions are completed.

This is the v2 version using CH340, serial port 4

Select serial port 4 and connect, and it will display ready.

annysky2012

Thanks for sharing~~~