To ensure the stability of electronic equipment, what tests need to be done on the hardware?

dianhang

To ensure the stability of electronic equipment, what tests need to be done on the hardware? [Copy link]

To ensure the stability of electronic equipment, what tests need to be done on the hardware?

maychang

"Stability" covers a wide range of content, including temperature stability, humidity stability, mechanical environment stability, electrical interference stability... and so on.

曹伟1993

Stability is generally tested for applications. It does not mean that every product needs to undergo all tests. Some tests are obviously not needed, so there is no need to do them, which is a waste of time.

qwqwqw2088

To indicate what type of electronic equipment it is, and whether there are characteristic stability indicators

Or find the testing standards or technical specifications for this type of equipment

Then determine which type of test is your key test, and then conduct relevant tests. If you can test it yourself, do it yourself. If you cannot test it, find a relevant agency.

If it is your own innovative research equipment, you can refer to related similar equipment

651076842

First of all, the parameters that you need to pay attention to in the specifications of various selected devices need to be tested

Secondly, in the circuit, test the signal quality of each signal line

Secondly, the whole machine reliability test, temperature, vibration, drop, high and low temperature storage operation, life test, etc.

Then, hardware system test, system stability test

Finally, EMC test, IP level test, network access test and other test items related to your product.

chunyang

That depends on the specific equipment and the design requirements.