Newbie help, Altium copper does not connect after plating

Alex1

Newbie help, Altium copper does not connect after plating [Copy link]

The first one is a picture I got from somewhere else, and the second one is the copper coating I applied myself. It is not connected to the copper foil. How can I apply it like the first picture?

okhxyyo

Maybe you set the copper plating incorrectly.

okhxyyo

It is best to take a screenshot of your copper settings. Press the tab key to see the copper settings.

Alex1

okhxyyo posted on 2019-9-15 19:12 It is best to take a screenshot of your copper settings. Press the tab key to see the copper settings

Is this it?

LuJianchang

You have set polygon pour cutout in these areas, so the copper cannot be connected. Just remove the dotted box.

CcKk

Change your design rules to the diagram and try laying copper again

btty038

Set the rules

Alex1

LuJianchang posted on 2019-9-16 08:43 You have already set polygon pour cutout in these areas, so the copper can't be connected. Just remove the dotted box ...

I want to connect the parts outside the dotted line. I can connect them according to other people's drawings, but I can't do it when I apply copper myself.

Alex1

CcKk posted on 2019-9-16 08:52 Change your design rules to the diagram and try copper re-laying

I have changed it, but there is no response, and it still cannot be connected.

Alex1

Solved, select Pour Over All Same Net Objects and they will be connected together