The HC32F460 development board is equipped with a 0.91-inch OLED LCD display with a resolution of 128*32 pixels. The communication interface of OLED is I2C, and SCL and SDA are connected to the two po
I read the tutorials online, and most of them show how to burn the program into the FPGA's FLASH online. I would like to use the tool to generate a file that can be burned into the FLASH based on my o
Install the compiler and connect the cables. (Hehe, I didn't expect that I could actually find a 2*5pin cable to save me from the trouble of using Dupont cables)Open their GPIO example using MounRiver
As mentioned before, the development environment can be simplicity studio or MDK. Although I use MDK more often, this time I chose the original simplicity studi as the compiler. The installation proce
BS EN IEC 62485-5:2021 Safety requirements for secondary cells and battery installations Part 5: Safe handling of stationary lithium-ion batteries - Full English version (45 pages)