[i=s]This post was last edited by Xu Jianqing on 2022-10-17 11:42[/i]The digital power supply we made is used to charge and discharge the battery. There are two connections between the power supply an
To learn the operation of MCU peripherals, we must first know the registers of the corresponding peripherals and their functions:ADC10 RegistersADC10 input enable register 0 ADC10AE0 Read/write 04Ah R
I finished inserting data at noon, and continued writing and reading data after dinner:elif data_quest['command'] == "getPersonnel":if 'phone' in data_quest:print("按手机号码查询")results = personnel_informa
As shown in the red box in the picture, taking GPIOF as an example, its boundary address is 0x40021400 - 0x400217FF. By calculation, it can be concluded that the address size is 0x3FF bytes. Regardles