PIC12C671 MCU Mouse

Publisher:机械梦想家Latest update time:2019-10-23 Source: eefocusKeywords:PIC12C671 Reading articles on mobile phones Scan QR code
Read articles on your mobile phone anytime, anywhere

Introduction 

  
The PIC12CXXX microcontroller would be a great mouse controller, but it doesn't have enough I/O. You need two I/Os for the X-axis encoder, two for the Y-axis encoder, one for the serial output, and 2 or 3 I/Os for the mouse buttons, but we only have 6 I/Os. The

solution is to use A/D conversion for the buttons. 2 or 3 switches can be coded, depending on how you connect them through resistors and use A/D conversion to read the result. The A/D pin can be periodically changed to go into the coded LED. See the schematic.


Circuit Diagram


Keywords:PIC12C671 Reference address:PIC12C671 MCU Mouse

Previous article:16c54 four-digit LED clock display program
Next article:PIC12C508 based timer

Recommended ReadingLatest update time:2024-11-23 14:57

MCU serial communication source code
This test program uses the STC12C4052AD microcontroller, uses the internal crystal oscillator 6M to start the oscillation, and the transmission baud rate is 2400bps. The test was passed on November 17, 2012. Use STC-ISP, V488 version to flash the machine, and use its own serial port assistant program to test. The sourc
[Microcontroller]
[MCU Notes] Active Buzzer Driver-Efficiency Programming
Buzzers are very common devices, divided into passive and active types. Choose different types of buzzers according to project requirements. In recent projects, active buzzers are used. It's still the same old routine. Draw the circuit board and then program it. The schematic diagram in the project is as follows:
[Microcontroller]
[MCU Notes] Active Buzzer Driver-Efficiency Programming
AVR MCU driver NOKIA3310 sample program
#include          #include          #include           void main(void)         {             PORTB&=209;           DDRB|=46; //Set the MCU's 4 LCD pins to output 0            while(1)                 {                    lcd_init(); //LCD initialization                           lcd_cls(); //Clear the screen,
[Microcontroller]
Share a 51 single-chip DC motor speed control source program
To help novices quickly master the system design of 51 single-chip microcomputer simulating PWM wave for DC motor speed regulation, the single-chip microcomputer source program is as follows: /*******************************************************************/ /* Program name: PWM DC motor speed regulation*/ /* Cry
[Microcontroller]
Realization of Single-wire Communication of Microcontroller Based on 1-WireTM Technology
In the construction of a large-scale single-chip microcomputer application system, it is inevitable to use a multi-machine system, which often involves information exchange between systems. When the communication rate requirement is not high, we hope that the two communicating parties occupy as few port connections
[Microcontroller]
Realization of Single-wire Communication of Microcontroller Based on 1-WireTM Technology
PIC microcontroller A/D conversion data storage and serial port efficiency
The data after A/D conversion of PIC microcontroller usually needs to occupy two 8-bit wide RAM units, but the storage units of PIC microcontroller are limited, so the storage units of the microcontroller cannot be effectively utilized. At the same time, it takes a lot of time to transmit data to the host computer thr
[Microcontroller]
What is the connection between microcontrollers, ARM, MCU, DSP, FPGA, and embedded systems?
A popular explanation of the complex relationship between MCU, ARM, MUC, DSP, FPGA and embedded systems! First of all, "embedded" is a concept. There is no accurate definition. Different books have their own definitions. But the main idea is the same. Compared with general systems such as PCs, embedded systems are s
[Microcontroller]
What is the connection between microcontrollers, ARM, MCU, DSP, FPGA, and embedded systems?
Design of three-phase combined inverter based on SA4828 and single chip microcomputer
1 Introduction Power supply equipment is a kind of electronic product with large quantity, wide application and strong versatility. Power supply is used in almost all departments such as modern communication, electronic instruments, computers, industrial automation, power engineering, national defense, etc. It is al
[Microcontroller]
Design of three-phase combined inverter based on SA4828 and single chip microcomputer
Latest Microcontroller Articles
Change More Related Popular Components

EEWorld
subscription
account

EEWorld
service
account

Automotive
development
circle

About Us Customer Service Contact Information Datasheet Sitemap LatestNews


Room 1530, 15th Floor, Building B, No.18 Zhongguancun Street, Haidian District, Beijing, Postal Code: 100190 China Telephone: 008610 8235 0740

Copyright © 2005-2024 EEWORLD.com.cn, Inc. All rights reserved 京ICP证060456号 京ICP备10001474号-1 电信业务审批[2006]字第258号函 京公网安备 11010802033920号