I recently used an asynchronous FIFO and found the show-ahead mode very interesting. As shown in the figure below, after simulating the FIFO IP core, you can see that the data is written two clock cyc
The core function of my project is to monitor the pressure at the construction site and provide threshold alarms. The Kaluga board is used to implement the functions of the host computer. The main con
Recently, I have been studying Linux interrupt-related content and encountered many doubts. One of them is that the interrupt is turned off during the interrupt handler processing. So is it the global
Surge suppression devices are usually used to protect electronic circuits. Common surge suppression devices include: gas discharge tube GDT, metal oxide varistor MOV, transient suppression diode TVS a
[i=s]This post was last edited by kal9623287 on 2022-7-13 11:53[/i]Seeing the two pictures below, I have some doubts. Please help me analyze them. Thank you.
1. For the following figure, if Vin=12V, V